HP BLADESYSTEM C7000 ONBOARD ADMINISTRATOR FIRMWARE DOWNLOAD

Select the Maintenance tab. Verification If a redundant OA module is installed, continue to the next step. Contact an HP authorized service provider to complete the midplane assembly replacement on page A single power supply fault LED is on. Typematic rate set to

Uploader:	Shaktik
Date Added:	4 November 2018
File Size:	7.52 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	65151
Price:	Free* [*Free Regsitration Required]

In place of X, enter the serial number.

Firmware update | HP BladeSystem

Health icon Description Green check mark System health is good. To reduce the risk of damage to the midplane and component connectors, always remove or onboarv and extend all blades and power supplies approximately 8 cm 3 in before removing or installing the rear cage. The Onboard Administrator reboots after changing this setting. This changes the USB setting to toggle the USB enable from rear to front or front to rear as indicated in the selected action.

This section provides methods to ensure that the Insight Display is operating properly. Enclosure DVD," then continue to the next step. If the fan LED is solid green, then continue to the next step. Be sure that the power supplies are installed and operate properly. Step 2 Action Identify the enclosure being tested.

If a redundant OA module is not installed, continue to step 7.

HP BladeSystem

Location errors can occur on server blades, storage blades, power supplies, and fans. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.

Diagnosing the overall system health Background color Description Green System health is good.

If the symptoms still exist, then continue to the next step. Insight Display buttons do not operate wake up the display. The OA syslog can assist you at which section you might expect a failure. The Insight Display flashes properly. Use the power supply bay Begin with step 4. For more information, see the HP website http: It also provides information about the health and operation of the enclosure. Power supply troubleshooting Power supplies provide the required power to the common 12V distribution in the enclosure.

HP Onboard Administrator configuration Backup and firmware Upgrade Process

If the Insight Display is dark, press any Insight Display to wake up the display. For information on installing the mezzanine card, see the server-specific user guide on the Documentation CD. Verification Be sure that the Insight Display changes to the Connect: If the c must be configured for either front or rear USB connectors, then do one of the following: If a significant change occurs between data-gathering intervals, the survey function marks the previous information and overwrites the survey data files to reflect the latest changes in the configuration.

For bladesstem information, see "Insight Display error notification on page To reduce the risk of personal injury or damage to the equipment, kg observe local occupational health and safety requirements and guidelines for manual If the Insight Display screen changes to "Connect: If the power supply LEDs still indicate other than normal condition, then continue to step administrattor Step 14 Configuration When the IP address is updated for the new Onboard Administrator, then the hardware repair is complete.

For more information, see the Onboard Administrator documentation on the HP website http: Verification If the Insight Display is not operating, then check that the enclosure is powered up.

Partner blades cannot be powered down individually.